Below is the back of the Targus Docking Station where most ports are located
To set up the docking station, you will need to plug in power
Depending on the type of cords, you will either use "Display" marked with the D or "HDMI" below the display ports. *you may use both depending on monitor count.
Note * if your screens don't work using display port, try plugging into the other display port on the monitor.
Next, we need to connect to the network.
You are connected when you see the Orange and Green lights.
We will now connect the laptop to the dock. Find the end of the cord that has a USB-C and USB adapter. This end will go into your Laptop.
The other end will go into the docking station from the back.
This is an example of what it looks like with display cables plugged in
Lastly, you will know there is power by looking for the LED on the front of the docking station.